Manual Manipulators

This micro-controller is based on our M3 model with an x 2 axis pitch angle adjustment function. It is connected to a non-magnetic base (as shown below) and a magnetic base, the utility model is further placed on a common test table, a clean table, a shock-proof table, etc. .

 Technical parameters 

X axis (fine adjustment): moving distance 9.6mm, reading accuracy is 10um(0.01mm).

X-axis: moving distance 32mm, reading accuracy 100um (0.1mm).

Y axis: moving distance 22mm, reading accuracy 100um (0.1mm).

Z axis: moving distance 20mm, reading accuracy 100um (0.1mm).

 Order information