Manual Manipulators

On the basis of the above M3 Micromanipulators, angle of pitch adjustment are added onto the following X2-axis and/or Base. The base angle of pitch is 0-70°, and the X2-axis is 0-50°. 

The stable base can be placed directly on an ordinary experimental table, or can be fixed on a magnetic base, or use with magnetic optical plates or anti-vibration tables. 

Technical Parameters:

***** X axis (fine): moving 13mm, reading accuracy is 10um(0.01mm).

***** X-axis (coarse): moving 32mm, reading accuracy 100um (0.1mm).

***** Y axis (coarse): moving 22mm, reading accuracy 100um (0.1mm).

***** Z axis (coarse): moving 20mm, reading accuracy 100um (0.1mm).

***** The angle of pitch for X2-axis：0-50° .

***** The angle of pitch for the Base：0-70° .

 Order Information